3 TPH Biomass Steam Boiler for Wood Processing in Bangladesh
This verified JINHONG project supplied a 3 TPH biomass steam boiler for a wood-processing plant in Bangladesh. The photograph records the actual chain-grate boiler package at the factory before delivery.
Industrial steam equipment matched to wood processing in Bangladesh.
Wood-processing factories may use steam for veneer conditioning, hot pressing, drying, kiln heating and other production stages. Wood chips and suitable production residues may also become a local boiler fuel after size, moisture, ash and feeding behaviour are checked.
Bangladesh · Wood Processing
This is a verified JINHONG project for wood processing in Bangladesh. The equipment and delivery records shown on this page belong to this project.
Authentic equipment, factory testing and delivery documentation
This page presents verified records from JINHONG’s manufacturing, factory-testing and delivery process for this project.
Verified JINHONG project and equipment record.
JINHONG verified the project destination, industry, equipment identity and delivery stage. The images on this page are authentic records of the 3 TPH biomass steam boiler supplied for the Bangladesh wood-processing project.
The project challenge
A 3 TPH plant often needs better automation than a manually fired system, but automation only works when the fuel is sufficiently consistent. Oversized pieces, excessive moisture, fibrous material and variable ash can interrupt feeding or change combustion. The buyer therefore needs a fuel-handling route designed around the actual local biomass.
Why this system route
The automatic chain-grate route is suitable for plants seeking continuous feeding, more stable furnace conditions and lower manual handling than a hand-fed boiler. It should not be selected from capacity alone. JINHONG reviews fuel geometry, bulk density, storage method, operating shifts and ash behaviour before defining the hopper, conveyor, grate speed and air system.
Authentic equipment and delivery records from JINHONG.
Project
Bangladesh wood-processing project verified by JINHONG
Equipment
3 TPH biomass steam boiler with chain-grate fuel system
Factory Record
Actual boiler package photographed at the JINHONG factory
Delivery Record
Complete equipment prepared for project delivery
Define the plant conditions before final equipment selection.
A reliable proposal needs the operating data behind the project. The following items should be confirmed before the model, auxiliaries and site responsibilities are frozen.
Continue from the case to the correct boiler family.
Use the product pages for technical ranges and selection boundaries. The final model and supply scope remain subject to the approved proposal.
Questions buyers ask.
Which fuels can an automatic chain-grate boiler use?
Suitability depends on size distribution, moisture, ash, slagging tendency and calorific value. Pellets, briquettes, wood chips and agricultural residues require different feeding and combustion checks.
Is 3 TPH the same as the plant’s usable steam at every moment?
The rated capacity is a design reference. Usable steam depends on operating pressure, fuel quality, feedwater conditions, controls and the final approved configuration.
Why include the fuel system in the inquiry?
Stable feeding is central to stable steam. Fuel preparation, storage and conveying should be discussed at the same time as the boiler.
Send your steam demand, fuel and destination requirements for a project-specific proposal.
JINHONG will define the boiler, fuel system, water route, flue-gas treatment, controls, documentation and delivery boundary against your actual plant conditions.
Request a Technical Proposal →
Verified JINHONG project record.